7.Connect the drain pipe as shown in fig 6 and the other end to an appropriate drain, for example a laundry standpipe or under
sink spigot . Drain connections to the plumbing side are not supplied.
8.Insert the appliance into the housing, ensuring that the runners on the machine are located in the runners on the base unit. Then slide the appliance fully into the housing.
Please note:
Due to the weight of this appliance, the housing unit must be secured to the wall prior to installation.
You must ensure that all water connections are sound and check there are no leaks and check the drain is in place, before completing installation.
For best performance, the mains water pressure must be between 0.1 - 3 bar. Do not use outdoors.
Do not locate the drain outdoors. Do not install near a hob or oven.
To reduce the risk of electric shock, do not mount over a sink.
i
fig. 4
fig. 5
fig. 6
8
