How to use the hob
The ceramic surface of the hob allows fast transmission of heat vertically from the heating elements under the glass to the pans on the hob top.
The heat does not spread horizontally, so the hob top remains relatively cool only a few centimetres from the zone in use.
To switch the hob on
Touch and hold 
until the zone displays show 0 or H and the zone indicators flash.
Please note:
If a zone is not selected within 10 seconds, the hob will automatically switch off.
To switch on a zone
Once the hob is switched on, touch 
for the zone required. The zone indicator will switch on to confirm the zone is active.
Touch and hold 
to select the power level from 1 (minimum) to 9 (maximum). The power level selected will show on the zone display.
If required, touch 
again to deactivate the touch control for the zone.
To adjust the power level once set
Touch 
for the zone required. The zone indicator will switch on to confirm the zone is active. Touch and hold 
or 
until the required power level shows on the zone display.
To use the dual zone
The dual zones are formed of two separate coils of resistant material.
Once the zone is switched on, touch 
at any time to switch the dual zone on or off. The dual zone indicator will switch on when the dual zone is on.
To switch off a zone
Touch 
for the zone required.
EITHER Touch 
and 
at the same time. OR Touch 
until the zone display shows 0.
The zone display will show 0 for approximately eight seconds before showing H to indicate the residual heat.
To switch the hob off
Touch and hold 
at any time.
.
4
