CDA HVN61/81 How to install the hob, Overall dimensions of the hob, HVN61FR Width 580 mm, 580/770

How to install the hob:
Overall dimensions of the hob:
HVN61FR: Width: 580 mm	Depth: 510 mm	HVN81FR: Width: 770 mm	Depth: 510 mm
Worktop cut-out dimensions:
HVN61FR: Width: 560 mm	Depth: 490 mm	HVN81FR: Width: 750 mm	Depth: 490 mm

1.Make the required hole in the worktop. Before doing this, you must check the instructions supplied with any cooker hood to ensure that you will have the required clearance. The cut-out (Fig.6) shows a 60mm gap from the wall to the cut-out edge. The distance from the hob, when fitted, to the back wall is 50mm.

If a splashback/worktop upstand is to be fitted, take this into account when cutting the hole. The minimum distance that the hob should be positioned away from the rear wall or splashback is 50mm.

2.Fix the foam seal underneath the appliance by following the outline of the worktop upon which the hob will rest This ensures an airtight seal with the worktop. Do not use silicone type sealant.

Fig.4

min 4mm

Above an oven

400mm 600mm

Fig.5

580/770 510

Fig.6

64

60

ventilation40 space

490 560 / 750

A

40

40