21
Fig. 22
Fig. 23
Inside of oven
The oven should always be cleaned after
use when it has cooled down.
The cavity sho uld be cl eaned using a
mild detergent solution and warm water.
Suitab le p roprieta ry c hemical cle aners
may b e used after first consulting with
the manufacturers recommendations and
testing a small sample of the oven cavity.
Abras ive clean ing agent s or sco uring
pads/cloths should not be used on the
cavity surface.
NOTE: The manufacturers o f this appli-
ance wil l ac cept no resp onsibi lity for
damage caused by chemical or abrasive
cleaning.
Let the oven cool down and pay spe-
cial attention no to touch the hot heat-
ing elements inside the oven cavity.
Assembling anddismantling of the siderunner frames
– Fit the sid e r unner fram es i nto the
holes on the side walls inside the oven
(Fig. 22).
– Slide the tray and rack into the runners
(Fig. 23).
The rack must be fitted so that the safe-
ty catch, whi ch st ops it s liding out ,
faces the inside of the oven.
– To dismantle, operate in reverse order.
Fig. 24
L
F
Oven floor
The oven floor “F” (fig. 24)
can be easi ly remove d to
facilitate cleaning.
Remember to replace the
floor correctly afterwards.
Be ca reful not to confuse
the tray “L” with the oven
floor “F”.