Care and Maintenance

Clean the panes of glass using a soft sponge and washing up liquid. Do not soak the glass in water.

Do note use abrasive cleaning products, metallic scrapers or scouring sponges. These could scuff the surface and cause the glass to shatter.

Rinse with clean water and dry off with a lint-free cloth.

Replace the clean panes in the door, taking care to slot the frame under the spigot next to the hinge, as shown in figure 12. Reattach the frame by tightening it against the door until the frame clicks into place.

Do not push down on the door itself as this may damage your oven.

Finally remove the red stoppers from the hinge slots.

Fig. 11

Fig. 12

CLAC

CLAC

Fig. 13

14

Page 15
Image 15
CDA SV470 manual Clac