General Settings and Use
To programme the oven
Turn the function control knob to the required programme.
The display will flash the temperature preset for the programme (as detailed on page 8) and start cooking immediately.
To change the temperature, turn the temperature control knob until the required temperature shows on display. The temperature will flash on the display whilst the oven heats up. Once the oven has reached the required temperature, the oven will beep three times and the temperature display will stop flashing.
To set the cooking time (the cooking starts immediately, and finishes at a programmed time to a maximum of 9 hours 59 minutes), touch 
once so the cooking time indicator flashes and the display shows 0:00. Then touch 
or until the required cooking time (in minutes) shows on the display and after eight seconds delay the oven will confirm the programme. The cooking time indicator will stay lit and the cooking time will show on the display.
To set a delayed programme (the cooking starts and finishes at a programmed time up to 23 hours 59 minutes), first set the cooking time as above, then immediately touch 
so the end time indicator flashes and the display flashes the time the programme is due to end (current time + cooking time). Then touch 
or until the required end time shows on the display, and after eight seconds delay the oven will confirm the programme. The cooking and end time indicators will stay lit, the current time will show on the display and the oven light will switch off. When the programme starts cooking, the end time indicator will switch off, the cooking time will show on the display and the oven light will switch back on.
To cancel a programme, touch once so the cooking time indicator flashes, then touch |
| until the display shows 0:00. |
|
At the end of the programme, the oven will beep intermittently for approximately two minutes, and the cooking time indicator will flash. To stop the beep, touch any of the keys.
Please note: The function control knob must be turned to 0 to switch off the oven completely after a programme is finished, and before any new cooking can start.
If the oven must be preheated, switch on the oven as above. Once the preheat is complete, the upper bars on the temperature indicator on the display will stay lit and the oven will beep three times, pause, and beep three times again.
7
