Recommendations
•To reduce energy and waterconsumption,removeallalldirtdirtresiduesfromthethedishespriorpriortotoloadingthethedishwdishwasher• .
•Only run the dishwasheronlywhenwhenfullyfullyloadedloaded. .
•Place hollow items (bowls, glasses and pans) face down in the basket.
•Place hollow items (bowls, glasses and pans) face down in the basket.
Before first use
•Set the water softener level as required by the water hardness in the area.
•Add 2kg of salt into the salt compartment and then fill with water to the top of the salt compartment.
•Remove all the packaging materials from the interior of the dishwasher.
•Fill the rinse aid compartment.
•Run a hot programme without any dishes in the dishwasher.
Control Panel
Power Button
To switch the power to the dishwasher on or off, press the power button (1). When you switch on the dishwasher, the end of programme light will illuminate..
Programme Selection Button
To select a programme, press the programme selection button (2). The dishwasher will store in its memory the last programme used. To change the programme, press the programme selection button again until the light next to the required programme is illuminated.
Delay Timer Button and Delay Timer Indicator Lights
The dishwasher is equipped with a variable delay timer of three, six or nine hours’ duration. To set the delay timer, press the delay timer button (3). This will switch on the delay timer for three hours, and the 3h light will illuminate. To change the duration, press the delay timer button again until the light next to the required time (6h or 9h) is illuminated.
To cancel the timer, press the delay timer button again until none of the delay timer indicator lights are illuminated.
As the delay timer counts down, the delay timer indicator lights will illuminate in turn, so at six hours’ delay the 6h light will illuminate, and at three hours’ delay the 3h light will illuminate.
Salt Warning Light
When the dishwasher salt begins to run out, the salt warning light will illuminate to advise that the salt needs refilling.
Rinse Aid Warning Light
When the rinse aid begins to run out, the rinse aid warning light will illuminate to advise that the salt needs refilling.
End of Programme Light
When the programme is complete, the dishwasher will emit five beeps and the end of programme light will illuminate.
|
| Programme selection button |
|
|
| 2 |
|
Power button | 1 | Delay timer button | Indicator lights |
| 3 |
|
