Specification, Trouble Shooting, Cecilware Corporation

SPECIFICATION:

	Model No.	IWC-25A Induction Wok
	Voltage	240V ~ 60Hz
	Vitro-Ceramic Wok	Diameter: approx. 12.75”
	Electrical Power	Max. 2,500watt
	Consumption
	Safety Device	z Over Time Protector (2 Hrs.)
		z Automatic Safety Shut-Off
		z	Material Compatibility Detector
		z	Small Object Detector
		z	Overheating Protection Device
		z	IC Auto Reset.
	Dimension	15.16” x 16.61” x 6.30” (including rubber-foot stand)
		38.5cm x 42.2cm x 16cm (including foot stand
		height)
TROUBLE SHOOTING

1.If your induction wok cooker seems to be working improperly, it doesn't necessarily mean it's faulty. In all cases, check the below points.

2.If you fail to identify the problem, contact the after-sales service immediately.

Problem	Resolution
No indication light when power "on"	Cable/terminal block is loose
	Tripped circuit or fuse; or automatic switch in your house
	Power supply stopped
Heating indicator does not light-up,	Unsuitable cooking utensil
Appliance fails to heat up	Utensil is located at the center properly
	Utensil is smaller than 5cm
	Over-heating protection is activated
Appliance suddenly stops heating	Temperature became too high
during Operation
	Air entrance or outlet blocked
	Over-heating protection activated

Cecilware Corporation

43-05 20th Avenue

Long Island City, NY 11105

Tel: 800.935.2211, 718.932.1414

Fax: 718.932.7860

Technical Support

Tech.Support@cecilware.com

Customer Service:

Customer.Service@cecilware.com