![](/images/new-backgrounds/1101989/10198925x1.webp)
CARE AND CLEANING OF THE OPTICS
Occasionally, dust and/or moisture may build up on the lens of your spotting scope. Special care should be taken when cleaning any optical instrument so as not to damage the optics.
If dust has built up on the lens, remove the dust with a camel’s hair brush or a can of pressurized air. Spray at an angle to the lens for approximately 2 to 4 seconds. Then use an optical cleaning solution (available at most optical suppliers) and white tissue paper to remove any remaining debris. Strokes should go from the center of the lens to the outer edge. Do not rub in circles.
You can use
Internal adjustments and cleaning should be done only by the Celestron repair department. If your spotting scope is in need of internal cleaning, please contact the factory for service.
More...
Celestron offers an extensive array of spotting scope accessories. Consult the Celestron Accessory Catalog (#93685) for details.
13