Section 2 Installation
2-6 WR850
Electrical Connection to Router Your router does not have an On/Off power switch and therefore will only be powered on by
plugging in the power adapter:
Reset
Power LAN
To pow er
supply
1 Connect the power adapter to the router’s Power port, found on the back of the router.
2 Plug the power adapter into a grounded and surge-protected power outlet.
The Power LED on the front panel lights green when connected properly.
Easy Software Setup Run the Installation Wizard program from the supplied CD-ROM to quickly set up your
network. Once your network is up and running, for advanced configuration, see
Section 3: Configuration.
Manual Software Setup If you’d prefer to manually set up your network, use this section to configure it. This section
details the physical connection of the router to your network as well as the configuration
needed by your PC.
To set up your wireless network:
Physically connect and power on the router
Configure your PCs
Enter Wireless Security settings