H I

LOW

Lighting the Side Burner

Use the Electronic Igniter on the main control panel and the Side Burner control knob, on the far left panel, to light the side burner.

•Push in and turn the side burner control knob to the HIGH position.

•Push the igniter button.

•If the burner does not light, turn the control knob to the OFF position and wait 5 minutes for the gas to clear.

•Repeat the above instructions. If the side burner still does not light,

refer to the troubleshooting section for help or light the burner manually.

Note: The side burner is designed to accept a maximum weight of 20 lb. Do not overload the side burner.

Lighting the Side Burner with a Match

•Place match in front ring of provided match holder.

•Place a lighted match through the hole to within 16 cm (1/2˝ ) of the side burner.

•Push in and turn the burner knob to the “HIGH” position. At this point, the burner should light, if it doesn’t after 5 seconds, turn the

control knob back to the “OFF” position and wait for the gas to clear.

•Wait 5 minutes, and then repeat the manual lighting procedure. If after three tries the burner still does not light, review the troubleshooting guide for help.

Shutting Down the Barbecue After Use

•Turn off the gas cylinder valve.

•Turn the burner control valve to the “OFF” position.

This sequence is important as it prevents residual gas from being left in the system under pressure and will make the next use easier.

Visually Check Burner Flame

Take off the grates and flame tamers. Light burners. Adjust the flame by turning the knobs from “HIGH” to “LOW”. The flames will be smaller when the knobs are in the “LOW” posi- tion. Always check flame prior to each use. Perform flame check for side burner.

8

Page 9 Page 11
Page 10
Image 10
Centro 6500 Lighting the Side Burner with a Match, Shutting Down the Barbecue After Use, Visually Check Burner Flame
Page 9 Page 11

6500 specifications

Centro 6500 is a robust and cutting-edge system designed primarily for enterprises seeking a comprehensive solution to handle their data management needs efficiently. With a blend of advanced features and superior technologies, the Centro 6500 stands out in today's competitive landscape.

One of the main characteristics of the Centro 6500 is its scalability. Organizations can begin with a minimal setup and expand their capabilities as their needs grow. This flexibility makes it an attractive option for startups and large corporations alike. The system supports a wide range of data types, allowing businesses to manage structured, semi-structured, and unstructured data effortlessly.

The architecture of the Centro 6500 is built on a resilient framework that ensures high availability and reliability. Redundancy is integrated into the system, allowing for continuous operation even in the event of hardware failures or maintenance activities. Organizations can rely on the Centro 6500 to keep their operations running smoothly and to minimize downtime.

In terms of performance, the Centro 6500 leverages advanced algorithms and optimized processing techniques to deliver rapid data access and transaction speeds. This efficiency is further enhanced by its integration capabilities, allowing organizations to connect with various third-party applications and platforms seamlessly. As a result, teams can streamline their workflows and enhance productivity across departments.

Moreover, the Centro 6500 incorporates powerful data analytics and reporting tools that empower organizations to derive actionable insights from their data. Users can create custom reports and visualizations that provide real-time information, supporting informed decision-making processes.

Security is a top priority with the Centro 6500. The system employs sophisticated encryption protocols, multi-factor authentication, and robust access controls to safeguard sensitive information. Businesses can rest assured that their data is protected against unauthorized access and potential breaches.

With a user-friendly interface, the Centro 6500 simplifies the user experience, making it accessible to users with varying levels of technical expertise. Comprehensive training resources and customer support further ensure that organizations can maximize their investment in the system.

In summary, Centro 6500 is a versatile, high-performance system characterized by its scalability, reliability, and security features. With its advanced analytics capabilities and user-friendly design, it provides an all-encompassing solution that meets the diverse needs of modern enterprises.
Top Page Image Contents