To Reset The Gas Regulator Safety Device

1.Close the LP (propane) tank valve.

2.Turn all burner control knobs to the OFF position.

3.Disconnect the regulator from the LP tank.

4.Open the grill lid.

5.Open all of the control knobs to the high position.

6.Wait 2 minutes.

7.Close all of the control knobs.

8.Re-connect the regulator to the LP tank. Test for leaks.

9.With lid open, push in and turn the CENTER burner control knob to the HIGH position and then ignite the grill by pressing the Electronic Ignition button.

10.Once lit, close the grill lid.

11.Wait for 10 to 15 minutes for the Barbecue to preheat.

ATTENTION: Proper start up and shut down procedures should be Followed to avoid regulator safety device activation.

W A R N I N G

If the heat output is too low, the flow control feature may have been

activated by a gas leak. If so, turn off the burner valve and cylinder valve, and perform the “Leak Test”. If there aren’t any leaks, re-light the burner.

S A F E T Y

L E A K T E S T I N G

Drawing B

Drawing C

 

 

 

 

Drawing D

Perform a “Leak Test”

•Before lighting your barbecue for the first time.

•Every time the cylinder is refilled, or any component is replaced.

•At least once every year, preferably at the start of the season.

The “Leak Test” must be done outdoors, away from heat, open flames and flammable liquids. Do not smoke while performing the test. Use only a mixture of 50/50 liquid soap and water for leak testing. Never use a match or open flame.

The Following Must Be Checked

•The tank valve including the threads into the tank (Drawing C).

•All tank welds (Drawing B).

•Regulator fittings and tank connections (Drawing C).

•All hose connections (Drawing D).

•With a newly filled and tested propane tank attached to the barbecue and all the barbecue controls turned “OFF”, slowly open the cylinder valve one full turn.

•Using a brush and soap, soak all the connections and components listed above and shown in drawings B, C, D.

•Look carefully for bubbles forming, which is an indication of leaking gas.

•Tighten the connections at the bubbled areas until re-testing shows no indication of any leaks (shut off cylinder while correcting any leaks).

•Shut off the cylinder valve and ensure all control valves are off.

•Do not use the barbecue if any leaks cannot be stopped. Turn off the gas cylinder valve, remove the gas cylinder and seek assistance from a qualified gas appliance service mechanic or gas dealer.

5

Page 6 Page 8
Page 7
Image 7
Centro 6500 warranty To Reset The Gas Regulator Safety Device, F E T Y A K T E S T I N G, Perform a Leak Test
Page 6 Page 8

6500 specifications

Centro 6500 is a robust and cutting-edge system designed primarily for enterprises seeking a comprehensive solution to handle their data management needs efficiently. With a blend of advanced features and superior technologies, the Centro 6500 stands out in today's competitive landscape.

One of the main characteristics of the Centro 6500 is its scalability. Organizations can begin with a minimal setup and expand their capabilities as their needs grow. This flexibility makes it an attractive option for startups and large corporations alike. The system supports a wide range of data types, allowing businesses to manage structured, semi-structured, and unstructured data effortlessly.

The architecture of the Centro 6500 is built on a resilient framework that ensures high availability and reliability. Redundancy is integrated into the system, allowing for continuous operation even in the event of hardware failures or maintenance activities. Organizations can rely on the Centro 6500 to keep their operations running smoothly and to minimize downtime.

In terms of performance, the Centro 6500 leverages advanced algorithms and optimized processing techniques to deliver rapid data access and transaction speeds. This efficiency is further enhanced by its integration capabilities, allowing organizations to connect with various third-party applications and platforms seamlessly. As a result, teams can streamline their workflows and enhance productivity across departments.

Moreover, the Centro 6500 incorporates powerful data analytics and reporting tools that empower organizations to derive actionable insights from their data. Users can create custom reports and visualizations that provide real-time information, supporting informed decision-making processes.

Security is a top priority with the Centro 6500. The system employs sophisticated encryption protocols, multi-factor authentication, and robust access controls to safeguard sensitive information. Businesses can rest assured that their data is protected against unauthorized access and potential breaches.

With a user-friendly interface, the Centro 6500 simplifies the user experience, making it accessible to users with varying levels of technical expertise. Comprehensive training resources and customer support further ensure that organizations can maximize their investment in the system.

In summary, Centro 6500 is a versatile, high-performance system characterized by its scalability, reliability, and security features. With its advanced analytics capabilities and user-friendly design, it provides an all-encompassing solution that meets the diverse needs of modern enterprises.
Top Page Image Contents