ASSEMBLY and USE continued
Canopy
Canopy can only be used with Playard/Crib.
DO NOT use canopy when using bassinet.
4Pull end of Sleeve over rod and
release rod.
Repeat for other rod.
Sleeve
WARNING
Avoid serious injury or death:
Temperature inside Playard/Crib with canopy can be higher than outside:
•DO NOT cover mesh. Keep well ventilated.
•Keep out of direct sun.
•Remove child from Playard/Crib before child becomes overheated.
1 Lay canopy on flat surface.
2 Unfold rods and insert fiber glass ends into aluminum ends.
NOTE: There are three
(3) sections of each rod that must be extended.
3Slide rod completely into canopy fabric.
Repeat for other rod.
5Set canopy over Playard/Crib and insert canopy tabs into curved slots of Playard/Crib corners.
6Secure canopy bottom around Playard/Crib corners using Attachment Strips.
Attachment
Strips
6
