Century Avanta manual Operations and Adjustments

OPERATIONS and ADJUSTMENTS

1Harness Straps (fig. a):

•To tighten: Pull lower belt tab.

•To loosen: Pull and hold upper belt tab while pulling harness straps.

2Buckle:

3-Point Models

•To buckle: Push tongue down into slot. Pull up on tongue to be sure it is locked.

•To unbuckle: Press red button and pull tongue out.

5-Point Models

•To buckle: Insert both tongues into buckle. Pull up on tongues to be sure they are locked.

•To unbuckle: Press red button and pull tongues out.

32-Piece Harness Tie:

•To open: Squeeze tabs and pull apart.

•To close: Snap halves together. Make sure harness tie is locked by pulling out on each half.

4

5

6

7

Adjustable Handle:

•Handle has three adjustment positions.

•Push in red buttons on each side of handle, rotate and release red buttons. Continue rotating handle to desired position until you hear a “click” sound.

•IMPORTANT: Before lifting car seat, place handle in “locked” upright carrying position.

Removing Car Seat from Base:

•Place handle in “locked” upright carrying position.

•Squeeze red release handle in base (fig. b).

•Lift car seat out of base.

Adjusting Car Seat Recline (2-Positions):

•Squeeze lever up and rotate car seat to Reclined or Semi-reclined position (fig. c).

•Release handle.

Adjustable Base:

•Pull Level Adjuster Handle out (fig. d).

•Adjust Foot to desired position.

•Release adjustment handle. Be sure it retracts into slot.

12