Century Avanta manual Installation with Base

INSTALLATION WITH BASE

1

Place base rear-facingon vehicle seat. 8 Check level indicator on base.

2

Thread vehicle lap belt through base belt Tabs

Ball MUST be entirely in green zone (fig. c). If necessary adjust Foot.

and buckle belt.NOTE: Vehicle must be on level ground and

NOTE: Vehicle shoulder belt must NOT be placed under belt Tabs.

child in car seat when leveling.

3Press down firmly on base to compress vehicle seat cushion while tightening vehicle lap belt (fig. a).

4Pull front to back and left to right to check for secure installation (fig. b). Vehicle lap belt MUST stay tight.

If not secure, see “Vehicle Seat Belts” section.

5

6

Put car seat in base and pull up on car seat to be sure it is locked in base.

Place child in car seat and check for secure installation (see 4 ).

7Adjust handle to a position behind car seat.

6