Century ISPB009BA manual Harness System removal and re-assembly, Harness Removal

HARNESS SYSTEM - removal and re-assembly

HarnessRemoval:

•Remove harness strap loops from Splitter Plates on back of car seat.

•Pull harness strap out of car seat, harness tie and tongues.

Store all parts for future use.

•Remove crotch strap (see page 19).

When re-assembling harness system, be sure harness straps are not twisted.

HarnessRe-assembly:

1Thread end of harness strap down through slot in seat pad and car seat and back up through slot in opposite side of car seat pad, through harness tongues and harness tie.

IMPORTANT: Harness strap MUST be threaded over adjustment strap on bottom of car seat as shown in illustrations.

Thread ends of harness straps through matching shoulder slots in back of seat pad and car seat.

2Re-attach harness straps to Splitter Plate on bottom

Put right strap loop on Splitter Plate first, then attach left strap loop.

3Re-attach crotch strap (see page 19).

20