VEHICLE SEAT BELTS (continued)
❃Lap Belts - With Retractor
With Harness System: |
|
Lap belts with retractors may or may not hold |
|
a car seat securely. |
|
Follow these steps to determine if you have a |
|
retractor system that will hold car seat securely: |
|
a. Pull belt all the way out. |
|
b. Allow belt to retract about 6 inches (15 cm). |
|
c. Pull out on belt again. |
|
If belt is locked and you cannot pull the belt out |
|
any further, you have an Automatic Locking |
|
Retractor which may be used with a car seat. |
|
Remember, when installing a car seat, pull belt | Retractor |
all the way out, buckle belt, and then tighten. | |
If you can pull the belt out again (step c), you |
|
have an Emergency Locking Retractor which |
|
must not be used with a car seat. |
|
Without Harness System: |
|
DO NOT use this type of vehicle seat belt to |
|
secure child and booster car seat. |
|
20
