ASSEMBLY and USE continued
Canopy
Canopy can only be used with Playard.
DO NOT use canopy when using bassinet.
4Pull end of Sleeve over rod and
release rod.
Repeat for other rod.
Sleeve
WARNING
Avoid serious injury or death:
Temperature inside Playard with canopy can be higher than outside:
•DO NOT cover mesh. Keep well ventilated.
•Keep out of direct sun.
•Remove child from Playard before child becomes overheated.
1 Lay canopy on flat surface.
2 Unfold rods and insert fiber glass ends into aluminum ends.
NOTE: There are three
(3) sections of each rod that must be extended.
3Slide rod completely into canopy fabric.
Repeat for other rod.
5Set canopy over Playard and insert canopy tabs into curved slots of Playard corners.
6Secure canopy bottom around Playard corners using Attachment Strips.
Attachment
Strips
6
