Century PM-1647AA ASSEMBLY and USE continued, Playard assembly is now complete and ready to use

Models: PM-1647AA

1 12
Download 12 pages 59.85 Kb
Page 5
Image 5
ASSEMBLY and USE continued

ASSEMBLY and USE continued

HINT: It may be necessary to lift end of Playard to push center down.

6Place floorboard in Playard with

padded side facing up.

NOTE: DO NOT install floorboard if using bassinet. Go to bassinet assembly section.

7 Secure ends of floorboard to Playard by passing Attachment Straps through holes in bottom of Playard floor and securing to underside of Playard.

Attachment

Strap

WARNING

To prevent child from suffocating, attachment Playard assembly is now complete and ready to use.Bassinet straps MUST be secured to underside of Playard.

Playard assembly is now complete and ready to use.

Bassinet

WARNING

Avoid serious injury or death:

Use bassinet with infant who weighs less than 8.2 kg (18 lbs.) and is less than 63.5 cm (25 inches) tall.

DO NOT use without floorboard being properly place in bassinet.

Discontinue use of bassinet if infant can push up on hands and knees or sit unassisted.

DO NOT carry bassinet with infant in it.

DO NOT use as a car bed.

DO NOT use infant canopy as a sunshade.

SUFFOCATION HAZARD: To help prevent suffocation from entrapment, use only floorboard provided by Century. NEVER use additional mattress or padding.

1 Lay bassinet on flat surface and spread open.

2 Rotate and extend four (4) Hooks until they “click” in place.

Hook

3If floorboard is installed in

Playard, remove floorboard.

4Fold Floorboard into “W”

shape and place in center of bassinet.

FloorboardManual backgroundManual backgroundManual backgroundManual background

4

Page 5
Image 5
Century PM-1647AA ASSEMBLY and USE continued, Playard assembly is now complete and ready to use, Bassinet