Fig. a, Fig. b | Century 1000, PM-1663AB, 4261 specs

REAR-FACING INSTALLATION

1Adjust car seat to recline position and place rear-facingon vehicle seat.

2Thread vehicle seat belt through openings and buckle belt.

3Press down firmly in center of car seat to compress vehicle seat cushion while tightening vehicle seat belt (fig. a).

4Pull front to back and left to right to check for secure installation (fig. b). Vehicle lap belt MUST stay tight.

If not secure, see “Vehicle Seat Belts” section.

5Check level indicator on car seat.

Ball MUST be entirely in green zone (fig. c). If necessary, place rolled towels under car seat, at vehicle seat crease, until entire ball is in green zone. Then re-check level indicator.

NOTE: Vehicle must be on level ground and child in car seat when checking level indicator.

Century 1000, PM-1663AB, 4261 manual Fig. a, Fig. b

Models: 4261 1000 PM-1663AB

REAR-FACING INSTALLATION

(fig. a)

(fig. b)

(fig. c)