FORWARD-FACING INSTALLATION
1
2
3
4
5
Adjust car seat to upright position and place
Thread vehicle seat belt through openings and behind harness straps (fig. a).
Buckle belt.
Press down firmly in center of car seat to compress vehicle seat cushion while tightening vehicle seat belt.
HINT: Use your knee to press down in center of car seat (fig. b).
Pull front to back and left to right to check for secure installation (fig. c). Vehicle lap belt MUST stay tight.
If not secure, see “Vehicle Seat Belts” section.
Attach tether strap hook (A) to anchor hardware (B) and tighten strap to remove any slack (fig. d).
If tether anchor hardware (B) is not available, see “Installation of Anchor Hardware“ section.
Tether
Strap
Openings 
Stand
Pull to tighten
(A)
(B)
(fig. a) | (fig. b) | (fig. c) | (fig. d) | 7 |
