OPERATIONS and ADJUSTMENTS

1Harness Tie:

2-Piece (available on some models):

To open: Squeeze tabs and pull apart.

To close: Snap halves together. Make sure harness tie is locked by pulling out on each half.

1-Piece:

To open: Unhook harness tie from child’s left side (fig. a) of harness strap.

To close: From backside of harness tie, slide harness strap over harness tie tongue.

2Adjustable Handle:

Handle has four adjustment positions.

Push in red buttons on each side of handle, rotate and release red buttons. Continue rotating handle to desired position until you hear a “click” sound.

IMPORTANT: Before lifting car seat, place handle in “locked” upright carrying position.

3Buckle:

3-Point Models

To buckle: Push buckle down on tongue. Pull up on buckle to be sure it is locked.

To unbuckle: Press red button and pull buckle off tongue.

5-Point Models

To buckle: Insert both tongues into buckle. Pull up on tongues to be sure they are locked.

To unbuckle: Press red button and pull harness tongues out of buckle.

4Removing Car Seat from Base:

Place handle in “locked” upright carrying position.

Squeeze red release lever in base (fig. b).

Lift car seat out of base.

5Adjustable Base (available on some models):

Pull blue adjustment Handle out (fig. c).

Adjust Foot to desired position.

Release adjustment handle. Be sure it retracts into slot.

10

Page 28
Image 28
Century Travel SolutionsTM Plus manual Harness Tie Piece available on some models, Adjustable Handle, Buckle Point Models