10. SUSPENSION OF THE CVP SERIES
Remove the fly bracket screws in the fly points where you want to install M10 eye bolts. Screw in the M10 eye bolts being careful not to strip the fly bracket screw insert point. Do not remove fly bracket screws from areas where you will not install eye bolts – insure that either an eye bolt or a fly bracket screw is installed in all fly bracket screw insert locations.
Using the mounting points at an angle will
- WLL = cosine (angle) x 500
- Where: angle = degrees form vertical pull
500 = WLL for each CVP mounting point @ vertical pull
11. SPECIFICATIONS
Frequency Range | 50 Hz - 20 kHz | 37 Hz - 20 kHz |
Frequency Response | 59 Hz - 18.5 kHz | 48 Hz - 18.5 kHz |
Sensitivity @ 1w / 1 Meter | 99 dB | 101 dB |
Power Capacity RMS / PK | 500 / 1000 w | 1000 / 2000 w |
Recommend Amplifier Power | 750 w - 1000 w | 1500 w - 2000 w |
Maximum SPL | 130 dB | 134 dB |
Coverage Pattern | 60 x 40 rotatable | 60 x 40 rotatable |
HF Diaphragm Size | 1.75” | 1.75” |
Weight | 66.5 lbs | 112.5 lbs |
Fly Points | Yes | Yes |
Bi Amp use | Yes | Yes |
Rotatable Horn | Yes | Yes |
HF Protection | Fast Reacting Suppression Limiter | |
Woofer |
| Ceramic 3” VC |
Construction | ||
Finish | Polyurethane Paint |
11