Lenovo 3484JMU manual Troubleshooting procedure

Models: 3484JMU

1 140
Download 140 pages 40.19 Kb
Page 100
Image 100
Troubleshooting procedure

Symptom

Action

 

 

The operating system does not

Verify that:

start.

• The startup sequence includes the device where the operating system resides.

 

 

Usually, the operating system is on the hard disk drive. For more information,

 

see “Selecting a startup device” on page 76.

 

 

The computer beeps multiple

Verify that no keys are stuck.

times before the operating

 

system starts.

 

 

 

Troubleshooting procedure

Use the following procedure as a starting point for diagnosing problems you are experiencing with your computer:

1.Verify that the cables for all attached devices are connected correctly and securely.

2.Verify that all attached devices that require ac power are connected to properly grounded, functioning electrical outlets.

3.Verify that all attached devices are enabled in the BIOS settings of your computer. For more information about accessing and changing the BIOS settings, refer to your Chapter 7 “Using the Setup Utility program” on page 73.

4.Go to the “Troubleshooting” on page 88 and follow the instructions for the type of problem you are experiencing. If the Troubleshooting information does not help you resolve a problem, continue with the next step.

5.Try using a previously captured configuration to see if a recent change to hardware or software settings has caused a problem. Before restoring a previous configuration, capture your current configuration in case the older configuration settings do not solve the problem or have adverse affects. To restore a captured configuration, do the following:

For Windows 7: Click Start Control Panel System and Security System System Protection System Restore.

For Windows 8: Open Control Panel, and then click System and Security System System Protection System Restore.

If this does not correct the problem, continue with the next step.

6.Run the diagnostic program. See “Lenovo Solution Center” on page 104 for more information.

If the diagnostic program detects a hardware failure, contact the Lenovo Customer Support Center. See Chapter 11 “Getting information, help, and service” on page 107 for more information.

If you are unable to run the diagnostic program, contact the Lenovo Customer Support Center. See Chapter 11 “Getting information, help, and service” on page 107 for more information.

If the diagnostic program does not detect a hardware failure, continue with the next step.

7.Use an antivirus program to see if your computer has been infected by a virus. If the program detects a virus, remove the virus.

8.If none of these actions solve the problem, seek technical assistance. See Chapter 11 “Getting information, help, and service” on page 107 for more information.

Troubleshooting

Use the troubleshooting information to find solutions to problems that have definite symptoms.

If the symptom your computer is experiencing occurred immediately after you installed a new hardware option or new software, do the following before referring to the troubleshooting information:

88ThinkCentre User Guide

Page 100
Image 100
Lenovo 3484JMU manual Troubleshooting procedure