Cerwin-Vega SDS-525T manual Adjusting The Speaker Tilt, Mounting A Speaker, Bracket Assembly

SDS-525t_Manual_V3.qxd 9/20/04 11:22 AM Page 3

CERWIN-VEGA SDS-525T STRUCTURAL DESIGN SERIES

ADJUSTING THE SPEAKER TILT

SDS-525T speakers are equipped with tilt brackets for use in wall or ceiling placement.

This feature allows you to quickly and conve- niently set speaker tilt for optimum sound directionality after placing the speakers.

TO ADJUST THE TILT:

❶Loosen the screw in the middle of the screw bracket.

❷Move the bracket up or down to provide the desired amount of tilt.

❸Tighten the screw.

MOUNTING A SPEAKER

The SDS-525T is equipped with an adjustable bracket to accommodate both wall and ceil- ing installations. The bracket with the circular adapter is intended for ceiling mounting to a threaded rod and offers a maximum tilt angle of 60º. Without the circular adapter, the bracket can be screwed directly to the wall with a maximum tilt angle of 45º.

IMPORTANT: If you are unsure of how to securely and safely fasten speakers to a wall, please con - tact a knowledgeable source about the best type of hardware for your particular wall's construction. Secure installation is the user's responsibility.

BRACKET ASSEMBLY

Included bracket is assembled using compo- nents supplied. Refer to illustration for assembly procedures. Please note that the adapter disc is optional for stud applications.

3