Arch Screen Door Kit
Installation Instructions
Models:
GABS4S0 (Black), GASS4S0 (Pewter)
GAHR4S0 (Black), GAHJ4S0 (Black)
The GABS4S0, GASS4S0 and GAHR4S0 are designed |
|
for use on Model DVA4136 and DVB4136 fireplaces. |
|
The GAHJ4S0 is designed for use on Model RDV4136 |
|
fireplace. | Figure 1 |
WARNING: Do not remove existing glass frame! Fireplace will not function
properly without glass frame. (Operating without glass frame in place could cause carbon monoxide (CO) to spill into the room.)
CAUTION: Allow unit to cool completely if it has been in operation.
Kit Contents:
•Screen Door Assembly, left
•Screen Door Assembly, right
•Arch Frame
•Installation Instructions
Installation Instructions
NOTE: Remove all plastic from packaging.
1.Remove existing top louvre from fireplace by lifting up and pulling out (Refer to top louvre instruction manual for details).
2.Hang arch frame over top of the existing glass frame.
3.Mount folding door assembly onto arch frame by hanging doors over top of the hinged pins located on both sides of the arch frame. (Fig. 1)
Ensure the left door is installed on the left and right door is installed on the right.
4.
Screen Door
Assembly
Hinged Pins
KT351
20013452 3/08 Rev. 1