Receiver and Remote Control Programming
NOTICE: To comply with FCC rules, adjustment or modification of this receiver and/or transmitter are prohibited, except for changing the code setting or replacing the transmitter battery.
THERE ARE NO OTHER USER SERVICEABLE PARTS.
Your garage door opener receiver and remote control transmitter have been set at the factory to a matching code. The door will open when you press the remote control push button.
Your "Smart" garage door opener will operate with:
•up to twelve "Smart" remote control transmitters (with green indicator lights),
•a Keyless Entry System, and
•code switch remote controls with red indicator lights.
Follow the instructions below to program your opener to match any additional remotes you may purchase. See accessories on page 38.
WARNING
Children operating or playing with a garage door opener can injure themselves or others. The garage door could close and cause serious injury or death. Do not allow children to operate the door control(s) or remote control transmitter(s).
A moving garage door could injure or kill someone under it. Activate the opener only when you can see the door clearly, it is free of obstructions, and is properly adjusted.
To Add A Remote
1.Press and hold the remote push button. See Figure 1.
2.Then press and release the "Smart" button on the back panel of the opener in Figure 2. The opener lights on the panel will flash once.
3.Release the remote push button.
Now the opener will operate when the remote control push button is pressed.
If you release the remote control push button before the opener lights flash, the opener will not accept the code.
To Erase All Remote Control Codes
•Press and hold the "Smart" button on the opener panel until the indicator light turns off (about 6 seconds). All the codes the opener has learned will be erased.
•To reprogram, repeat Steps 1 - 3 for each remote control in use.
Code programming instructions are also located on the opener panel.
Figure 1
Model 81LM
Single Function Remote Control
Green Battery
Indicator Light
Push Button
Figure 2
Garage Door Opener
(With "Smart" Button)
1 | 2 |
|
| 3 |
| 9 | 1 | 9 | 1 |
| 7 | 3 | 7 | 3 |
|
| 5 |
| 5 |
KGKG
"Smart" Indicator
Button Light
END PANEL
33