Overview

The Alert uses a Passive Infra-Red sensor to detect movement of people and vehicles, while allowing small animals to pass through undetected.

Carton Inventory

 

Swivel Bushing

Base Station

Passive Infra-Red (PIR)

 

Motion Sensor

 

Rubber Pads

 

 

 

 

AC Adapter

Sun/Rain Shield

 

 

 

 

Mounting Plate

 

 

 

 

 

 

 

 

 

 

Operation & Features

Base Station

Mute/Off

Button

Antenna

 

 

 

 

 

Relay Output

 

 

 

 

 

 

Contacts

 

 

 

 

 

 

 

 

 

 

 

 

 

AC Adapter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Learn Button

 

 

 

 

Base Station Switch #1

 

 

 

 

 

 

 

 

 

 

Base Station Switch #2

 

 

 

 

 

 

 

 

 

 

On/Off: To turn Base Station off hold down the Mute Button until it powers down. The Base Station can be turned on by pressing the Mute Button.

Mute: Press and release the Mute Button to put the Base Station into Sleep Mode for one hour. After an hour it will activate automatically.

Battery: The AA Alkaline batteries (not provided) in the PIR Motion Sensor will last up to 2 years depending on use (Lithium batteries recommended for colder environments). If Base Station battery (optional) is low, it will beep every few minutes. Replace with 9-Volt battery (not provided). For peak performance inspect batteries annually and replace as needed.

®

 

Model RWA310R

 

 

 

Wireless Pedestrian & Vehicle Alert

 

Base Station Switches:

 

 

 

 

 

 

 

Switch #1:

 

 

 

 

 

 

 

OFF

Buzzer Off

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ON

Buzzer On (Default)

 

 

 

 

 

 

OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Switch #2:

 

 

 

 

 

 

 

1

 

2

 

ON

 

 

 

 

 

 

 

 

 

OFF

Long Buzz

 

 

 

 

 

 

 

 

ON

Short Buzz (Default)

 

 

 

 

 

 

 

 

 

 

 

 

Programming Additional PIR Motion Sensors: The Base Station can learn the code of up to 3 additional PIR Motion Sensors, responding with unique buzzes. To program additional PIR Motion Sensors see Step 6.

Clear Memory: Press and hold the Learn Button on the Base Station until 3 beeps are heard.

PIR Motion Sensor Assembly & Test

Step 1

Attach PIR Motion Sensor box to mounting plate with large silver screw. Tighten screw until PIR Motion Sensor stays in place when repositioned.

Step 2

Install 4 AA Alkaline batteries (not provided). (Lithium batteries recommended for colder environments.) Test light will flash.

1