
A D J U S T M E N T
CONTROL BOARD PROGRAMMING AND
FEATURES (CONTINUED)
RELAY DRIVE TROUBLESHOOTING LEDS
There are 5 troubleshooting LEDs on relay drives K1 through K5. These LEDs will be illuminated when the microcontroller relay drive is activated.
LED | LED NAME | DESCRIPTION |
D6 | Contactor A | On when Contactor A is activated |
D5 | Contactor B | On when Contactor B is activated |
D4 | SAM | On when SAM relay is activated |
D3 | Lock | On when Mag Lock relay is activated |
D2 | Alarm | On when Alarm Relay is activated |
|
|
|
TROUBLESHOOTING LEDS
There are 9 troubleshooting LEDs.
LED | LED NAME | DESCRIPTION |
D11 | Radio | On when Radio switch is activated |
D13 | Shadow | On when Shadow Loop is activated |
D15 | Hard Close | On when Close switch is activated |
D17 (Green) | Stop | On when Stop switch is not activated |
D19 | Soft Open | On when Open switch is activated |
D21 | Hard Open | On when Open switch is activated |
D24 | Interrupt (Safety) Loop | On when Interrupt/Safety Loop activated |
D29 | Obstruction Open | On when Edge is activated or when Photo Eye |
|
| Beam is broken |
D31 | Obstruction Close | On when Edge is activated or when Photo Eye |
|
| Beam is broken |
|
|
|
25