Changhong Electric TM150F7E, TM201F7E manual Sleep Function, Indicator Light

Sleep 30

on the panel or【P+】/【P-】on the remote control to select the channel number. If a channel number is in SKIP ON mode, the next channel will be displayed.

A maximum of 2 digits can be keyed in at one time, the number button on the remote control is used. The symbol of “- -”on the upper-right corner represent tens and one respectively. The range is 0～99. The first input number is for tens, if it is “1”,“1-”appears on screen. The TV will switch to channel 1 if no additional number is keyed in within 3 seconds. Alternatively, press【OK】to switch to the desired channel after the corresponding number is keyed in.

Note: This function is only available in TV mode

●Sleep Function

Press【SLEEP】on the remote control once to activate the function and subsequent keying in to select the sleep time of 0, 15, 30, 45, 60,90, 120, 150,180, 240 and 0 minutes. This is will be reflected in the top right hand corner of the screen. After this step is done, press 【SLEEP】 to view the set sleep. See the illustration in the right.

● Indicator Light

Status	Light Colour	Description
On/Off	Off	The TV works normally/is power off
Standby	Red	In Standby Mode
Timer On/Off Or Sleep	Green	Timer On/Off is valid or Sleep is on
Sleep (PC)	Yellow	Sleep for power-saving;
Receives signal from the	Flickering	The indicator will flicker when the TV receives
remote control		signal from the remote control

PAGE 17