●Antenna
.To display the RF antenna mode, when this mode is Air, Auto Search begins searching from channel 2 to channel 69; When this mode is Cable, Auto Search begins from channel 1 to channel 125. Then what have searched before would be stored in the corresponding EEPROM, meanwhile, the channels which have not been searched will be set to Erase mode automatically.
●Auto search
Three situations for Auto Search to stop:
1.The TV does auto search and stores programs .
2.
3.you want to stop it by pressing
After the situation 3 happened, the search will automatically stop and back to the first channel, furthermore , the TV would return to the Tune menu.
●Name
Rename the program with four colored buttons on the remote control 【Red】for Capitalized English letters
【Green】for Alphanumeric numbers from 0 to 9 【Yellow】for special characters as “#”
【Blue】Resuming “*” in unnamed mode
Note: There is a PC Setup menu for the Tune menu in PC signal source; There is no Tune menu in AV、S－Video、YPbPr signal source.
ⅤClock
●Clock
The current actual time can be input by pressing the number
●Antenna
To display RF antenna mode.
●Time/ Off Time
The function of can be effectual only when Time/
Off Time is not off. Press the number buttons and
in cycle, Press【Vol+】/【Vol-】to set the corresponding value.
1 Whenever the main power is on, the clock item always displays “12:00AM”，only use 【Vol+】【/
2.To set Time/Off Time among Off/Once/Always with
3.This function can only be available when the main power supply is proper, otherwise, it can not be done and automatically adjusted to Off.
4. Of Clock、Time and Off Time, “Minute”ranges from 00 to 59，“Hour”is 1～12（AM），
PAGE 13
