Channel Plus 8053, 8051, 8052 instruction manual Model, Data/Telephone Hub applications

Data/Telephone Hub applications

Model 8053

POTS (Plain Old Telephone Service)

To distribute POTS, use either an 8051 or an 8053. All connectors are bridged (wired in parallel).

Use a model 8053 to distribute telephone service. A single model 8053 can handle up to 9 telephones. For more phones, add one 8053 for every 8 telephones. All connectors are bridged (wired in parallel.)

Model 8051

Use a model 8051 to distribute telephone service if you prefer to use modular connectors. The model 8051 also provides loopthrough on pair 1 for a security system or a DoorTel front door intercom. All connectors are bridged (wired in parallel.)

From Telco

Central Office lines (CO)

CO1, CO2, CO3, CO4

Model

8051

Jacks accept

6 position RJ-25 Or

8 position RJ-45 plugs

Expansion connector

110 punch-down blocks Do not punch-down more than one wire per connector.

In a structured wiring system, a model 8051 is used to provide selective telephone service. (See the section on Structured Wiring Systems.)

Model 8052

In a structured wiring system, a model 8052 is used to provide a termination point for all internal house wiring. (See the section on Structured Wiring Systems.) Each modular connector is individually connected to the 110 punch-down block behind it.

Model

8053

Tie wrap mounting holes

From Telco

Central Office lines (CO)

CO1, CO2, CO3, CO4