Channel Vision manual Using the A0315 as a main source input module, Primary audio source

System Wiring Diagram

Using the A0315 as a main source input module

Room 1 A0313

	CHANNEL	VIS ION
Channel Vision
L/S	R
	Line Out
	Amp-Link
	Pwr
	Source

Room 3 A0313

	CHANNEL	VIS ION
Channel Vision
L/S	R
	Line Out
	Amp-Link
	Pwr
	Source

P-2014

A0313 or A0301 A0125

(Rear) (Rear)

A0315

(Rear)

Primary audio source

							CH	NEL
								ION
			EL VISI		ON
									4
	C	HANN		14				Zone
	Model			P-20			Zone
				Zone 1		Zone 2
System
Input
									e
							bution	Modul
							o Distri
					1x 4	CAT5	Audi
			System				IR
			l				Emitters
Priority			Signa
			Local
L	Local		R
	Input

		IN	OUT
	n		T
xpansio		IN	OU
Output
Status	Power
	d)
(Optional)	(Require

Sat radio

Secondary audio source

In this configuration, either the satellite radio tuner or the A0315 connected to the System Input of the P-2014 can act as the main system input. If audio is present from both sources, then the Priority switch will determine which source is heard. In this example the switch is set to give the A0313 priority.

A0302

Channel Vision
L/S	R
	Line Out
	Amp-Link

(See A0125 manual for connection details)

A0301 and A0315 can be used as primary system inputs feeding the main hub or as local input modules in each room to override the primary audio source. The A0301 is a generic input module which provides a standard L/R RCA input and the A0315 is an iPod® docking station.

These local input modules should be installed in the CAT5 line between
the P-2014 and the A0125. Multiple input modules can be installed in one
CAT5 run. If audio is present at more than one input module the unit
closest to A0125 will take priority and be played through the speakers.	5