Hitch pin Wheel Flat washer Axle Short leg

On each short leg, slide one 1/2” flat washer onto axle, followed by a wheel, then another 1/2” flat washer. Slide a hitch pin

3 into the hole at the end of the axle.

Hitch pin

Hitch pin

Slide short legs onto posts closest to

4 firebox, with wheels facing outward. Slide long legs onto posts at opposite end. Secure legs to posts using one 3/8-16x1”hex-head bolt per leg.

NOTE: Do not fully tighten bolts. Tighten just enough so that leg will not slide off post. Bolts will be fully tightened when assembly is complete.

Short leg

Long leg

3/8-16x1” Hex-head bolt

Firebox