![](/images/new-backgrounds/1229524/22952419x1.webp)
Insert a small Hair Pin Clipinto the hole at one end of the axle and bend the ends of the pin back so that it cannot be removed. Slide
5 a wheel onto the axle. Slide the axle through the holes at the ends of the short legs. Slide the remaining wheel onto the axle and secure with the remaining Hair Pin Clip.
Finally, Push the wheel caps onto each end of the axle.
Hair Pin Clip
Wheel Cap
Hair Pin
Clip
Place the firebox onto the cart. The butterfly |
|
damper should be on you right hand side. |
|
6 Insert 4 each | |
cart and firebox. Secure the firebox using 4 |
|
each |
|
outside, flange nuts from inside chamber. |
|
FULLY TIGHTEN ALL SCREWS AND NUTS |
|
AT THIS TIME. |
|
Page 10