Char-Broil 10601514-16, 10601578-16, 08601559-16, 10601578-A1 manual Grill Body Assembly, Part Qty

6 ASSEMBLY GUIDE GRILL BODY Assembly

Part	Qty.
B1– Grill Base	1
B2– Wind Shield	1
B3– Grill Lid	1

Fasteners

10-24x3/8"	1/4-20x3/4"	Fiber Washer	1/4-20 Nut 10-24 Nut
screw	Hinge	(qty 5)	(qty 2)	(qty 10)
(qty 3)	screw

(qty 2)

Step 1 - Attach the Grill Base Assembly (B1) to the Cart Assembly by aligning the studs on the bottom of the grill with the corresponding holes in the tops of the leg assemblies. Secure with 7 each 10-24 nuts. A 3/8" Nut Driver (not supplied) will work nicely for this step.

Step 3 - Attach the Windshield (B2) to the Grill Base (B1) by aligning the holes in the panels with the corresponding holes in the Grill Base. Secure with 3 10-24 nuts, 3 10-24x3/8" Screws, and 3 fiber washers. The Windsheild will rest inside the Grill Base.

10-24		10-24x3/8"
	B2	Screws
Nuts		(3 each)

(3 each)

Studs located on Grill Base Assembly

B1

Fiber

B1

Washer

(3 each)

Cart

Bracket

B1

Step 2 - Press the Cart Bracket tightly against the Grill Base (B1) and tighten the screws. Once complete, turn the grill over to the upright position.

Step 4 - Attach the Grill Lid (B3) by aligning the hinge holes in the lid to the matching holes in the Windshield (B2). Insert 2 Hinge Screws into the holes and secure with 2 1/4-20 nuts and two Fiber washers from the inside of the grill.

1/4-20x3/4"

B3	Hinge
	Screws
	(2 each)

Fiber

Washer

(2 each)

1/4-20

Nuts

(2 each)

Visit www.sizzleonthegrill.com/user-forumsto chat with Patio Bistro® owners just like you!