Metra Electronics 99-8151 LEXUS IS 300 ISO RADIO PROVISION WITH POCKET, Kit Assembly

99-8151KIT ASSEMBLY

LEXUS IS 300 2001-2005

ISO RADIO PROVISION WITH POCKET

5Align and engage the (3) tabs on the bottom of the climate controls to the top edge of the radio housing/pocket assembly. Secure the climate con- trols to the assembly using the (4) factory Phillips screws previously removed from the climate controls.

6Mount the ISO Brackets to the radio with the screws supplied with the radio. (Figure E)

7Slide the radio into the radio housing assembly until it snaps into place. (Figure F)

8Snap the ISO Trim-plate onto the Radio Housing. (Figure G)

9Continue with final assembly.

Note: To remove the radio from the housing unclip and remove the ISO trim-plate. Using a small blade screw driver release the clips on the ISO snap in brackets and slide the radio out of the housing assembly.

E

F

G

6