Metra Electronics 99-8151 Figure D, Double Din Radio Provision, Kit Assembly

99-8151KIT ASSEMBLY

DOUBLE DIN RADIO PROVISION

4Align and engage the (3) tabs on the bottom of the climate controls to the top edge of the radio housing assembly. Secure the climate con- trols to the assembly using the (4) factory Phillips screws previously removed from the climate controls.

5Cut and remove the center divider from the double DIN trim-plate.

(Figure D)

6Snap the double DIN trim-plate onto the radio housing. (Figure E)

7Continue with final assembly.

D

E

8