Do not fully tighten screws until is complete

Put axle rod (item #4) through the holes on the right legs. Put wheels (item #5) onto the axle rod (item #4) and place the

3 wheel caps (item #6) over the axle rod ends.

4	Install leg braces (item #7), with support flange towards center of grill, onto the legs using eight M6 x 15mm Phillips head bolts.
	Do not fully tighten screws until Step 6 is complete.

NOTE: Leg brace with two holes for grease cup must be mounted on right side of grill legs.

Image 9

Do not fully tighten screws until Step 6 is complete.