Char-Broil 11301678 manual Shelf to the Firebox

Models: 11301678

1 16

Page 11

Attach the Side Shelf using 4 each 1/4-20x1" Machine Screws. Securely tighten the Side

Install the Firebox Damper Wheel by inserting 1 each 1/4-20x3/4" Machine Screw into the screw hole. Place the
Damper Wheel onto the screw from inside the firebox, making sure the tab sticks out through the damper holes. Install
8 the reversible Lock Nut onto the screw. Do not over tighten the nut, The Damper Wheel must be able to rotate freely.
	Reversible
	Lock nut	Damper Wheel
		Damper Wheel
1/4-20
Reversible
Lock Nut		1/4-20x3/4"
Qty. 1		Machine Screw

1/4-20x3/4”

Machine screw

Qty. 1

Page 11

Image 11

Contents

INSTALLER/ASSEMBLER Tools needed for assemblyCARBON MONOXIDE HAZARD THIS UNIT IS HEAVY! DO NOT attempt toCALIFORNIA PROPOSITION TABLE OF CONTENTSFollow all warnings and instructions when using the appliance Safety SymbolsSeasoning MaintenancePlease see information regarding Uncoated Cast Iron Grates below First Time UseBuilding Your Fire Always use caution when handling hot coals to prevent injuryKnow When Your Fire is Ready COOKING TIPSVegetables - Mesquite Direct and Indirect GrillingGrilling with Wood Chips/Wood Chunks Our RecommendationsTYPE OF FAILURE COVERAGE LIMITED WARRANTYSCOPE OF COVERAGE PERIOD OF COVERAGEPARTS LIST Insert Bottom Shelf wireform into each leg ASSEMBLYAxle Washer 3 Upper Leg Supports with 4 each, 1/4-20x3/4 Machine ScrewsMachine 1/4-20Flange Nut 7 Shelf to the Firebox details Place the Cooking Grates into the Firebox Cooking Grates Charcoal Grate Hanger Charcoal Grate Tabs11 the hanger tabs on the firebox 1/4-20x3/4” Machine screw Qty Axle Washer Qty Hinge Pin Qty HARDWARE LIST1/4-20x1 3/4” Machine Screw Qty 1/4-20 Flange Nut Qty Cotter Pin Qty 1/4-20x1” Machine Screw Qty 1/4-20 Reversible Lock Nut QtyPage REGTEMP REV02 Warranty Registration Department P.O. Box Columbus, GA