Char-Broil 463210510 manual Sideburner Valve

11	Remove two #8-32x5/16” screws from sideburner valve bracket,set aside until step 12.
	Repeat step 8(A)on left side shelf. Place left side shelf to the side of firebox(A).
	Tighten the pre-installed screws to the left side shelf(B). Make sure valve is inside sideburner tube.
	Attach left side shelf to the firebox with 1/4-20x1/2" screws on the upper	holes. Attach left	fasica	to control	panel
	with #10-24x1/2" screws . Attach sideburner ignitor wire to the electronic	ignition module	through	the hole	of the
	left plate of control panel(C).

Attach left towel bar to the rear of left side shelf with #10-24x1/2" screws and #10-24 hex nuts.

Attach left towel bar to the front of left fascia with #8-32x5/16” screw and #8-32 hex nut(D).

Left Side Shelf

Qty: 2	Qty: 7	Qty: 1
1/4-20x1/2"	#10-24x1/2"	#8-32x5/16”	A
Machine Screw	Machine Screw	Machine Screw

Qty: 5	Qty: 1
#10-24 Hex Nut	#8-32 Hex Nut

B Sideburner Valve

Sideburner Tube

C

D

Left Fascia

Left Towel Bar

Sideburner Ignitor Wire

22