Char-Broil 463230513 manual Back Pin, Sear Burner

•Place heat tents over tube burners by inserting tabs into slots in front of firebox. Opposite ends of heat tents rest on pins in back of

13 firebox.

NOTE: There is no heat tent over sear burner.

of	Firebox
Back

Pin

Heat Tent

Sear Burner

of Firebox

Front

Heat Tent

14	•	Place cooking grates onto grate rests.
	•	Insert ends of Warming Rack pivot wire into holes in sides of gril lid. Insert ends of Warming Rack leg wire into holes in sides of
		firebox.

NOTE: Pivot and leg wires, running side-to-side, should be under wires running front-to-back. If pivot and leg wires are on top, Warming Rack is installed upside-down.

• Unscrew ignitor cap and place AA battery into ignitor slot with positive end (+) facing outward. Replace ignitor cap onto ignitor.

Warming Rack

Leg Wire

Pivot Wire

Cooking Grate

-

+

+

–

AA Battery

26