18 • 463240804
6.
An additional one-half to
three-quarters turn is required to complete the
connection. Tighten by hand only – do not use tools.
NOTE:
do not use this regulator!
Turnthe coupling nut clockwise and tighten to a full stop. The
regulator will seal on the back-check feature in the LPtank
valve, resulting in some resistance.
If you cannot complete the connection, disconnect regulator and
repeat steps 5 and 6. If you are still unable to complete the
connection,
Straight
Holdcoupling nut and regulator
asshown for proper connection
toLP tank valve.
WARNING
• Do not insert any foreign objects into the valve outlet. You
may damage the valve and cause a leak. Leaking propane
may result in explosion, fire, severe personal injury,or
death.
• Never attempt to attach this grill to the self-contained LP gas
system of a camper trailer or motor home.
• Do not use grill until leak-tested.
• If a leak is detected at any time, STOP and call the fire
department.
• If you cannot stop a gas leak, close LPtank
valve and call LPgas supplier or your fire department!
immediately
Leak Testing Valves, Hose and Regulator
1. Turn all grill control knobs to OFF.
2.
3.
Correct
before proceeding
4.
Be sure regulator is tightly connected to LPtank.
Completely open LPtank valve by turning hand wheel
counterclockwise. If you hear a , turn gas off
immediately.There is a major leak at the connection.
.
Brush soapy solution onto areas circled below.
rushing sound
NOTE:Sideburner
controlpanel not
shownfor clarity.
5. If “growing”
If leaks cannot
be stopped do not try to repair.
6.
bubbles appear,there is a leak. Close LP tank
valve immediately and retighten connections.
Call for replacement parts.
Order new parts by giving the serial, model number and name
of items needed to the Grill Service Center at 1-800-241-7548
(U.S.) or 1-800-387-6057 (CANADA).
Always close LPtank valve after performing leak test by
turning hand wheel clockwise.