Char-Broil 463244012 manual Upper back panel

5

On back of grill, place upper back panel between side panels and above lower back panel. Secure upper back panel, in lower holes, using one 1/4-20x1½”screw, 7mm lock washer, and 7mm flat washer on each side. Do not fully tighten screws until side shelf installation is complete in later steps.

1/4-20x1½”	7mm lock	7mm flat
screw	washer	washer

Upper back panel

6

Insert flange on right side shelf into side shelf brackets on side of firebox.

Attach right side shelf using four 1/4”-20x3/4”screws, 7mm lock washers, 7mm flat washers, 1/4” nuts, shown A. Attach rear of shelf using one 1/4-20x1½”screw, 7mm lock washer, and 7mm flat washer in lower hole, shown B. Attach front of shelf and fascia using one #8x3/8” self-tapping screw and large flat washer, shown C.

	1/4-20x3/4”
B
	screw

7mm flat washer

7mm lock 1/4”nut washer

7mm flat	1/4-20x1½”
washer	7mm lock	screw
	washer

A

Bracket

Fascia, right side shelf

C

#8x3/8” self-tapping screw

Large flat washer

19