Char-Broil 463244012 manual Self-tapping screw

11

Insert front brace under control panel and between cart side panels. Make sure door hinge pins are on the top side and facing the front. Secure using two 1/4-20x1½”screws, 7mm lock washers, and 7mm flat washers on each side.

NOTE: MAKE SURE THAT THE FRONT BRACE IS MOUNTED IN THE MOST DOWNWARD POSITION WHEN ASSEMBLED TO CART.

Door

Hinge Pin

7mm flat	7mm lock	1/4-20x1½”
washer	washer	screw
Front brace

12

Inside of cart, insert left and right grease tray rails into slots beneath grease tray opening in upper back panel, shown A. Attach right and left rails under front brace with two #8x3/8” self-tapping screws, shown B.

Note: some parts omitted for clarity of illustration

A

Cart lower back panel

Right rail

Left rail

B

Right rail

Left rail

#8x3/8”

self-tapping screw

22