ASSEMBLY
1
Place bottom shelf upside down. Insert Bent U Pin into the caster mounting plate to lock it in place, shown A.
Spin the caster clockwise into the threads on the bottom shelf until secure. Remove the Bent U Pin and repeat for remaining casters. Make sure the two locking casters are secured at the rear and the fixed casters are secured at the front.
After all 4 casters are secure remove the Bent U Pin and save for future maintenance.
Locking caster
Fixed caster
A
Bent U pin
Bottom shelf
Front
Rear
2 | Attach side panels to bottom shelf using three |
7mm flat washers per panel.
IMPORTANT: Panel with large hole must be on Right side of bottom shelf.
Left side panel
Make sure side panels are pushed as far to the rear of bottom shelf as possible before fully tightening screws.
7mm lock washer
7mm flat washer
Right side panel (with large hole)
Front
Magnet
14
