Char-Broil 463268008 holes on fascia to, Note Use upper and lower, attach valve bracket, 5mm lock

9

First, remove the two screws and lock washers factory attached to the sideburner valve bracket. Position sideburner valve bracket beneath sideburner shelf fascia so that valve stem comes through larger center hole in fascia. Align the holes on valve bracket with left and right holes on fascia. Secure using lock washers and screws that were removed from bracket.

Next, place sideburner bezel over valve stem on front side of fascia. Align small holes on bezel with upper and lower holes on fascia. Attach using two #8-32x3/8”screws and 4mm lock washers. Press sideburner control knob onto valve stem.

Note: Use left and right

holes on fascia to

Install bezel with “OFF” at top.

Note: Use upper and lower

attach valve bracket

Screws and Washers removed from valve bracket

Control knob

holes on fascia to

attach bezel

#8-32x3/8” screw

4mm

lock washer

Sideburner fascia

Sideburner valve bracket

Control knob bezel

Valve stem

Insert sideburner burner into left shelf, making sure burner tube engages sideburner valve (A). Center stud on bottom of

10 burner fits into center hole in burner bracket on shelf. See illustration C for proper burner-to-valve engagement. Secure burner to bracket using two #10-24x3/8”screws, 5mm lock washers, and 5mm flat washers (B).

B

5mm flat washer

5mm lock	A
washer

Sideburner burner

#10-24x3/8” screw

Burner tube

C

463268008 • 19