Char-Broil 463268008 manual Front brace, Sideburner grate Sideburner Ignitor Wire Burner cap

11

Under sideburner shelf, attach sideburner ignitor wire to electrode (A). Place burner cap onto sideburner. Attach sideburner cap clip (B). Place sideburner grate onto sideburner shelf, aligning grate legs with holes in shelf.

A

Sideburner grate

Sideburner Ignitor Wire

Burner cap

B

Sideburner cap clip

12

First, attach tank heat shield and shield extension together with two #8-32x3/8”screws, 4mm flat washers, 4mm lock washers and #8-32hex nuts. Inside of cart, insert rear shield tabs into two left slots between upper and lower back panels. Attach left and center front shield tabs under front brace with #8x3/8” self-tapping screws. Insert left and right grease tray rails into slots beneath grease tray opening in upper back panel. Attach left rail to brace, with a #8x3/8” self-tapping screw. Attach right rail and right front shield extension tab together under front brace with a #8x3/8” self-tapping screw.

#8-32x3/8” Screw

Tank heat shield

Tank heat shield extension

4mm Flat washer

4mm Lock washer

Front brace

Some components not shown for illustration purposes.

#8-32 Hex nut

Grease tray opening

#8x3/8” self- tapping screw

Left grease tray rail

Right grease tray rail

20 • 463268008