Char-Broil 463270613 manual Wire AA Battery Cap, Flame tamers

13

Connect each of the wires from main burner electrodes into the back of Electronic Ignition Module. Total (2) connections. Connect the two wires [(a) and (b)] from switch wiring harness into the back of the Electronic Ignition Module. Total (2)connections, shown A. Unscrew the cap and nut from electronic ignition module. Attach electronic ignition module to cart right side panel with the nut, shown B. Insert AA battery into electronic ignition module, negative (—) end first. Replace the cap, shown C.

NOTE: Switch terminals are larger than electrode terminals and should only be installed in location shown as (a),(b).

B

A

Electronic ignition module

	1	(a)
			Nut
	2
Wire	(b)	C	AA Battery

- +

Cap

14

Install flame tamers by sliding one end of each flame tamer into slots at front of firebox and resting opposite end on pins in back of firebox.

Front of firebox

Flame tamers

Slide into slots

Back of firebox

Pin

20