Char-Broil 463411512 manual Tank Exclusion Brace, Grill Head

5	Tank Exclusion Brace
	□ Insert the end without hole into the left slot in the front panels, and then use one #8-32x3/8” machine screw
	to attach tank exclusion brace to bottom shelf.

#8-32x3/8”

Machine Screws

Qty. 1

Tank Exclusion

Brace

6	Grill Head
	□ This step requires two people to lift and position grill head onto cart.
	□ Cut tie wraps from regulator hose and remove styrofoam. Carefully lower the grill head onto cart, making
	sure the regulator hose and sideburner ignition wire are hanging outside cart . Rest the back and front of grill
	head on tabs protruding from front and rear legs as shown (A).
	□ Open top lid, and use four 1/4-20x1/2" machine screws to attach grill head from inner firebox to cart side
	braces as shown (B).
	□ Use two 1/4-20x1/2" machine screws to attach grill head to the two		Grill Head
	rear legs as shown (C).
		B	A

1/4-20x1/2”

Machine Screws

Qty. 6

C

19